FAQ’s

FAQ’s

Question: How to remove tiles from floor

Answer: Many people want to know how to remove tiles from floor. This is not an easy task and is best to get a licensed tiler to remove tiles. To remove tiles is very time consuming and is best to get the experts to do it. If you do decide to remove the tiles yourself you will need the following tools:

  • Scraper
  • Hammer
  • Safety Glasses
  • Hammer
  • Mask to protect against dust
  • Chisel

You will need to begin by hammering the centre of the tile
Use the chisel to remove the remaining tiles
Use scraper to remove the adhesive under the tiles.

Question: How to remove tiles from walls

Answer: To remove tiles from the walls it is best to remove the grout first. If you want to remove a single tile, remove the grout around that tile first. It is recommended to hire a qualified tradesman to do the job so that your tiles are not damaged.

Question: How to lay tiles

Answer: If you would like to know how to lay tiles, these are the things you should know:

  • Make sure the area you want to tile is clean
  • Measure the area you need to tile
  • Purchase your tiles and adhesive, spacers from a Tile Shop
  • Cut your tiles
  • Mix up adhesive for tiles
  • Lay adhesive on floor
  • Lay tiles
  • Insert spaces
  • Apply Grouting

It is always recommended to hire a tiler who is qualified to make sure you get the best professional job. Also a qualified tiler will make sure your tiling is completed according to the Australian Standards.

Questions: How to do waterproofing

Answer: Waterproofing is a very important step and it requires the qualified tiler to complete waterproofing to the Australian Standard

Question: How to stop leaking shower (90)

Answer: May people want to know how to stop a leaking shower. If you notice your shower is leaking it is best to look at it immediately. If you don’t attend to it quickly your house could be badly damaged. In most cases you may need to call a tiler to make sure and check your waterproofing has been done correctly. This may mean removal of some tiles and also re tiling.

Question: How to clean grout

If you want to know how to clean grout, you can try this.
Mix half a cup of baking soda and 1/4 of a cup of hydrogen peroxide and 1 teaspoon of dishwashing liquid. Mix it into a past then apply to grout and leave for about 15 minutes. Then use a grout brush cleaner to scrub the grout area. Then rinse clean.