Waterproofing Melbourne

Water is an essential element in a space like a bathroom. Common problems such as leaks or water losses are often the consequence of a bad installation, a poorly done reform or the passage of time that deteriorates the materials. Before using the bathtub, the shower tray or if you have just installed a built-in shower, it is essential to make sure that there are no leaks and that everything is insulated. Choosing the most appropriate materials, carrying out proper maintenance and regular bathroom cleaning, help make Waterproofing Melbourne bathrooms and showers safe.

Although there are many materials for wall tiles and flooring, the most common is to choose tiles in the bathroom. It is a cheap and resistant alternative, given the properties of the tile; it is the ideal material in a place where water and humidity are standard and where more water leaks occur. Here are some tips so that the waterproofing during Bathroom Renovations Melbourne is assured.

Smoothing and Correcting Imperfections

The first thing we must understand is that, although ceramic tiles are waterproof, the fact that joints join them means that leaks can occur if these joints deteriorate. That is why it is necessary to ensure the waterproofing Melbourne and sealing of the walls themselves before even laying the tiles.

But as always happens, before acting on any surface, it should be well prepared. And in this case, this means that both the walls and the floors are perfectly smooth.

Waterproofing Critical Points While Bathroom Renovations in Melbourne

Before applying the waterproofing mortar, the corners must be prepared, which are critical points. By corners, we mean the wall/wall and wall/floor joints (not the wall/ceiling joint). At these points, an elastic sealing band of about 15cm must be applied centred on the meeting of the two planes. This band must also be placed around pipes and drains, taking into account that there must be a minimum overlap of 5 centimetres at the joints.

With the strip already in place, any surface that will receive the waterproofing mortar should be moistened (not soaked).

Application of the Waterproofing Mortar

The waterproofing mortar must be applied with a trowel in two successive 1mm thick layers. Between coats, you should allow at least 4 hours to pass, as well as 24 hours of drying after applying the last coat.

Acrylic Wall Coverings

Acrylic wall coverings are the most common waterproof wall coverings in bathrooms during Bathroom Renovations in Melbourne. There are different designs, shapes or colours that will go perfectly with the decoration of your shower or bathtub. Most of these wall coverings are also made of acrylic, are easy to install yourself, and very waterproof as there are no joints.

Final Words

You see, the complete and correct bathroom Waterproofing in Melbourne can result in a slightly longer process than that of a simple realization, but the inconvenience is more than compensated by the tranquillity that we receive in return: the tranquillity of a job well done.